Work fast with our official CLI. Learn more. If nothing happens, download GitHub Desktop and try again. If nothing happens, download Xcode and try again. There was a problem preparing your codespace, please try again.

This branch is commits ahead of jgarzik:master. Open a pull request to contribute your changes upstream. Skip to content. Star 0. CPU miner for bitcoin yyz. Licenses found. This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository. Branches Tags. Could not load branches. Could not load tags. Launching Xcode If nothing happens, download Xcode and try again.

Launching Visual Studio Code Your codespace will open once ready. This branch is commits ahead , 36 commits behind jgarzik:master. Open pull request. Latest commit. Git stats 1, commits. Failed to load latest commit information. View code. Do not use on multiple block chains at the same time! This code is provided entirely free of charge by the programmer in his spare time so donations would be greatly appreciated. Please consider using the –donation feature or donate directly to the address below.

Do NOT install the ati amd sdk if you are on nvidia. Then building will be simpler. GPU mining support enabled. G gives you something like: GPU 0: [ ST is STaged work items ready to use. A good starting baseline intensity to try on dedicated miners is 9. Higher values are there to cope with future improvements in hardware. This means that if you input a number of pools, it will try to use them as a priority list, moving away from the 1st to the 2nd, 2nd to 3rd and so on.

If any of the earlier pools recover, it will move back to the higher priority ones. If any pool falls idle, the rest will take up the slack keeping the miner busy.

In other words if you would normally use:. There is also the -m option on linux which will spawn a command of your choice and pipe the output directly to that command. The setting passed to cgminer is used by all GPUs unless separate values are specified. All settings can all be changed within the menu on the fly on a per-GPU basis.

For example: –gpu-engine –gpu-memclock will try to set all GPU engine clocks to and all memory clocks to , while: –gpu-engine ,,, –gpu-memclock will try to set the engine clock of card 0 to , 1 to , 2 to , 3 to and all memory clocks to These can be used independently of each other and are complementary.

Both auto modes are designed to safely change settings while trying to maintain a target temperature. By default this is set to 75 degrees C but can be changed with: –temp-target e.

The overheat value is set to 85 degrees by default and can be changed with: –temp-overheat e. As a lower clock speed limit, the auto-gpu mode checks the GPU card’s “normal” clock speed and will not go below this unless you have manually set a lower speed in the range.

Also, unless a higher clock speed was specified at startup, it will not raise the clockspeed. If the temperature climbs, fanspeed is adjusted and optimised before GPU engine clockspeed is adjusted. If fan speed control is not available or already optimal, then GPU clock speed is only decreased if it goes over the target temperature by the hysteresis amount, which is set to 3 by default and can be changed with: –temp-hysteresis If the temperature drops below the target temperature, and engine clock speed is not at the highest level set at startup, cgminer will raise the clock speed.

If at any time you manually set an even higher clock speed successfully in cgminer, it will record this value and use it as its new upper limit and the same for low clock speeds and lower limits. If the temperature goes over the cutoff limit 95 degrees by default , cgminer will completely disable the GPU from mining and it will not be re-enabled unless manually done so. The cutoff temperature can be changed with: –temp-cutoff e.

In this example, it will set the memory speed to be Mhz lower than the GPU speed. This is useful for some cards like the which normally don’t allow a bigger clock speed difference. As the performance profile changes dynamically, querying the “current” value on the card can be wrong as well.

So when changing values in cgminer, after a pause of 1 second, it will report to you the current values where you should check that your change has taken. An example is that reference cards will accept low memory values but refuse to actually run those lower memory values unless they’re within of the engine clock speed.

In that scenario, they usually set their real speed back to their default. Cgminer reports the so-called “safe” range of whatever it is you are modifying when you ask to modify it on the fly. However, you can change settings to values outside this range. Despite this, the card can easily refuse to accept your changes, or worse, to accept your changes and then silently ignore them. Being very conscious of these possible failures is why cgminer will report back the current values for you to examine how exactly the card has responded.

Even within the reported range of accepted values by the card, it is very easy to crash just about any card, so it cannot use those values to determine what range to set.

You have to provide something meaningful manually for cgminer to work with through experimentation. When quitting cgminer, it will then try to restore the original values. Changing settings outside of cgminer while it’s running may be reset to the startup cgminer values when cgminer shuts down because of this.

The request can be either simple text or JSON. A: Older versions of libncurses have a bug to do with refreshing a window after a size change. Upgrading to a new version of curses will fix it. Q: Can I mine on servers from different networks eg smartcoin and bitcoin at the same time? A: No, cgminer keeps a database of the block it’s working on to ensure it does not work on stale blocks, and having different blocks from two networks would make it invalidate the work from each other.

A: Yes, pass a list separated by commas such as -I d,4,9,9 Q: Can I put multiple pools in the config file? A: Yes, check the example. Q: The build fails with gcc is unable to build a binary. Q: The CPU usage is high. A: The ATI drivers after Driver version Q: Can you implement feature X?

A: I can, but time is limited, and people who donate are more likely to get their feature requests implemented. A: The more aggressively the mining software uses your GPU, the less overclock you will be able to run.

You are more likely to hit your limits with cgminer and you will find you may need to overclock your GPU less aggressively. The software cannot be responsible and make your GPU hang directly.

If you simply cannot get it to ever stop hanging, try decreasing the intensity, and if even that fails, try changing to the poclbm kernel with -k poclbm, though you will sacrifice performance. It tries to restart them with a separate thread and if that separate thread dies, it gives up trying to restart any more GPUs. Q: Work keeps going to my backup pool even though my primary pool hasn’t failed?

A: Cgminer checks for conditions where the primary pool is lagging and will pass some work to the backup servers under those conditions.

The reason for doing this is to try its absolute best to keep the GPUs working on something useful and not risk idle periods. You can disable this behaviour with the option –failover-only. Q: Is this a virus? A: Cgminer is being packaged with other trojan scripts and some antivirus software is falsely accusing cgminer.

If you installed cgminer yourself, then you do not have a virus on your computer. Complain to your antivirus software company. Q: How does the donation feature work and how does it affect my shares? A: The donation feature is disabled by default and only does anything once enabled.

It queries the author’s website for login credentials and contributes up to a proportion of work to the author’s account. On exiting, the summary will tell you how many shares were contributed to the author. Q: Can you modify the display to include more of one thing in the output and less of another, or can you change the quiet mode or can you add yet another output mode? A: Everyone will always have their own view of what’s important to monitor.

The defaults are very sane and I have very little interest in changing this any further.

 
 

– Cgminer windows 10 64 bit

 
CGMiner – is an open source miner for ASIC, GPU and FPGA. It works on Windows, Linux and macOS. CGMiner is extremely flexible in terms of. and many more programs are available for instant and free download. CGMiner works great on Windows 10 a block): Step 1 Download and install. CGMiner on Windows Setup Guide for Bitcoin Users + ASIC Miner Setup Keep in mind that NVML monitoring only works in the bit version.

 

Cgminer windows 10 64 bit

 

Too many other solutions come with a bit more complex interface that assumes that you already have some experience, so if that is not the case — this is the miner for you. It also comes with several other features, such as a power-saving mode, which is a great thing to have, considering how expensive BTC mining can be, especially when it comes to electricity use.

Then, there is also mining pool support, as well as fast share submission. Of course, it would be very useful for you to automatically know whether you are making a profit by mining or not, instead of just waiting for a while and having your bills grow, only to receive a minimum amount in return. Bitcoin Miner has got you covered there as well, thanks to its profit reports feature. With it, you will always be able to determine whether your mining is actually earning you a profit.

If not, it is time to change your approach. Our next choice for the best bitcoin miner app for Windows 10 is CGMiner, which is probably one of the best-known, as well as the most commonly used software among the members of the Bitcoin mining community. CGMiner is also the most popular free Bitcoin mining software available for download on Github. Thanks to this, CGMiner is one of the most feature-rich options that you will ever find.

Some of the features that it contains include the ability to control fan speed, which is really useful when it comes to handling cooling. Another very useful feature is the self-detection of new blocks. The software also includes monitoring, overclocking, and a number of other features and operations, as mentioned above. It is definitely one of the best options, although the fact remains that it is likely only suitable for more advanced miners.

CGMiner is open source, with the original files stored on GitHub. The downside of this mining software is its lack of interface. It might not be friendly for beginners, especially if you do not know how to work with command lines. Plus, it is open-source, so if you are a programmer, you can customize or adjust the mining software to suit your needs.

Moreover, it allows you to mine bitcoins, litecoins, bytecoins, monero and other cryptocoins using only your computer or GPU.

It also offers a clean user interface that you can integrate with your cryptocurrency wallet. Also, it features military grade security empowered by round-robin SSD servers to ensure that no one will hack your account and steal your cryptocurrency. It is designed to focus on the mining process. In fact, you can use it within minutes compared to the countless hours you would waste to configure a bitcoin miner. It also delivers real-time statistics about the hashrate, total shares and earnings in the past hours for maximum transparency.

Plus, it can be your personal wallet management because it provides all the functionality and security of a professional wallet. It started at the end of and the founders initially use it for buying and selling Bitcoin.

They were fascinated by bitcoin technology and decided to build their own farm. They came up with the mining idea as a service and it became the first mining farm in Eastern Europe. Genesis Mining has over two million customers from more than countries worldwide. It also offers over 10 minable cryptocurrencies through six major mining algorithms. There have been over million transactions on the platform since it started in It also offers an improved affiliate program that has been renewed, rewritten and revamped.

The organization wants to reward its affiliates regardless of their size and whether they are a marketing expert or a home blogger. The Genesis Mining Team will give you an affiliate code that you can share with your family, friends, and the rest of the world.

Those in higher tiers enjoy better rewards and will receive more than hashpower because Genesis Mining is also giving away specials gifts. There is a dedicated section on the website for its affiliate page which is accessible for users after logging into their account. The best thing about Genesis Mining is that it welcomes feedback and suggestions. BTCC is one of the leading digital asset trading platforms in the world founded in June in Shanghai.

It offers exchanges, mining pools and wallets. It already has over , registered users and more than , transactions. Many choose BTCC for a number of reasons like it has a low barrier and has no lockup or investment requirement to join.

It has affiliate programs too and the members are the first to participate in its online and offline activities and latest products. CCG Mining is one of the best software you can use to start mining the most profitable cryptocurrencies and become an owner of the mining rig. It also offers the highest level of hashrate to increase your capital. Joining its affiliate program is also easy, you simply need to register at the website. To enjoy the benefits, just activate the affiliate program and get the referral link.

Place the referral link on the website. When your referrals by contracts through your referral link, you will get your reward. To be a successful partner, you can use a website or blog, advertise on YouTube, use social networks to share the affiliate links.

You can also communicate on the forums and send affiliate links in the signatures of your messages. All settings can all be changed within the menu on the fly on a per-GPU basis.

For example: –gpu-engine –gpu-memclock will try to set all GPU engine clocks to and all memory clocks to , while: –gpu-engine ,,, –gpu-memclock will try to set the engine clock of card 0 to , 1 to , 2 to , 3 to and all memory clocks to These can be used independently of each other and are complementary.

Both auto modes are designed to safely change settings while trying to maintain a target temperature. By default this is set to 75 degrees C but can be changed with: –temp-target e.

The overheat value is set to 85 degrees by default and can be changed with: –temp-overheat e. As a lower clock speed limit, the auto-gpu mode checks the GPU card’s “normal” clock speed and will not go below this unless you have manually set a lower speed in the range. Also, unless a higher clock speed was specified at startup, it will not raise the clockspeed.

If the temperature climbs, fanspeed is adjusted and optimised before GPU engine clockspeed is adjusted. If fan speed control is not available or already optimal, then GPU clock speed is only decreased if it goes over the target temperature by the hysteresis amount, which is set to 3 by default and can be changed with: –temp-hysteresis If the temperature drops below the target temperature, and engine clock speed is not at the highest level set at startup, cgminer will raise the clock speed.

If at any time you manually set an even higher clock speed successfully in cgminer, it will record this value and use it as its new upper limit and the same for low clock speeds and lower limits.

If the temperature goes over the cutoff limit 95 degrees by default , cgminer will completely disable the GPU from mining and it will not be re-enabled unless manually done so. The cutoff temperature can be changed with: –temp-cutoff e. In this example, it will set the memory speed to be Mhz lower than the GPU speed. This is useful for some cards like the which normally don’t allow a bigger clock speed difference.

As the performance profile changes dynamically, querying the “current” value on the card can be wrong as well. So when changing values in cgminer, after a pause of 1 second, it will report to you the current values where you should check that your change has taken. An example is that reference cards will accept low memory values but refuse to actually run those lower memory values unless they’re within of the engine clock speed. In that scenario, they usually set their real speed back to their default.

Cgminer reports the so-called “safe” range of whatever it is you are modifying when you ask to modify it on the fly. However, you can change settings to values outside this range. Despite this, the card can easily refuse to accept your changes, or worse, to accept your changes and then silently ignore them.

Being very conscious of these possible failures is why cgminer will report back the current values for you to examine how exactly the card has responded. Even within the reported range of accepted values by the card, it is very easy to crash just about any card, so it cannot use those values to determine what range to set.

You have to provide something meaningful manually for cgminer to work with through experimentation. When quitting cgminer, it will then try to restore the original values. Changing settings outside of cgminer while it’s running may be reset to the startup cgminer values when cgminer shuts down because of this. The request can be either simple text or JSON. A: Older versions of libncurses have a bug to do with refreshing a window after a size change.

Upgrading to a new version of curses will fix it. Q: Can I mine on servers from different networks eg smartcoin and bitcoin at the same time? A: No, cgminer keeps a database of the block it’s working on to ensure it does not work on stale blocks, and having different blocks from two networks would make it invalidate the work from each other.

A: Yes, pass a list separated by commas such as -I d,4,9,9 Q: Can I put multiple pools in the config file? A: Yes, check the example. Q: The build fails with gcc is unable to build a binary.

Q: The CPU usage is high. A: The ATI drivers after Driver version Q: Can you implement feature X? A: I can, but time is limited, and people who donate are more likely to get their feature requests implemented. A: The more aggressively the mining software uses your GPU, the less overclock you will be able to run. You are more likely to hit your limits with cgminer and you will find you may need to overclock your GPU less aggressively. The software cannot be responsible and make your GPU hang directly.

If you simply cannot get it to ever stop hanging, try decreasing the intensity, and if even that fails, try changing to the poclbm kernel with -k poclbm, though you will sacrifice performance. It tries to restart them with a separate thread and if that separate thread dies, it gives up trying to restart any more GPUs.

Q: Work keeps going to my backup pool even though my primary pool hasn’t failed? A: Cgminer checks for conditions where the primary pool is lagging and will pass some work to the backup servers under those conditions.

The reason for doing this is to try its absolute best to keep the GPUs working on something useful and not risk idle periods. You can disable this behaviour with the option –failover-only. Q: Is this a virus? A: Cgminer is being packaged with other trojan scripts and some antivirus software is falsely accusing cgminer.

If you installed cgminer yourself, then you do not have a virus on your computer. Complain to your antivirus software company. Q: How does the donation feature work and how does it affect my shares? A: The donation feature is disabled by default and only does anything once enabled. It queries the author’s website for login credentials and contributes up to a proportion of work to the author’s account.

On exiting, the summary will tell you how many shares were contributed to the author. Q: Can you modify the display to include more of one thing in the output and less of another, or can you change the quiet mode or can you add yet another output mode?

A: Everyone will always have their own view of what’s important to monitor. The defaults are very sane and I have very little interest in changing this any further. A: The defaults are sane and safe. I’m not interested in changing them further. Can I set it lower?